Set an Approach Marker

After you Add a Zone, you can add an approach marker to that zone. Setting an approach marker rotates the image of your zone so that the approach is always at the bottom.

1. Select Zones.
2. Select the Zone you want to set a boundary for. 
3. Scroll down to Zone Boundary.
4. Select the Edit icon in the upper right corner of the zone boundary pane. 
5. Scroll down to Approach Marker.
6. Select Set. 
7. On your map, press and hold the location of where you would like the approach marker set.
8. Select Save if you are satisfied with the location, or select Cancel to try again.